Ford 2002 Bantam - G11: Front Hub and Stud Circle Run out; G12: Wheel Balance

204-00-18 Suspension — General Information 204-00-18
DIAGNOSIS AND TESTING (CONTINUED)
E1049 EN 06/2001 2002 Bantam
CONDITIONS
DETAILS/RESULTS/ACTIONS
G11: FRONT HUB AND STUD CIRCLE RUN OUT
1 Remove the front wheel.
- Remove the front brake disc.
- Measure the stud circle run out (greater than
0.06 mm) and rotor pilot radial run out
(greater than 0.05 mm).
• Are the measurements correct?
 Yes
CHECK the front brake disc run out.
REFER to Section 206-00.
TEST the system for normal operation.
 No
INSTALL a new hub.
REFER to Section 204-01.
TEST the system for normal operation.
G12: WHEEL BALANCE
1 Balance all the wheels. Road test the vehicle.
• Is a vibration felt?
 Yes
REFER to Section 100-04.
 No
Verify the customer concern.