211-05-107 Steering Column Switches 211-05-107
REMOVAL AND INSTALLATION
Steering Column Multifunction Switch (33 612 0)
Removal
1. Disconnect the battery ground cable.
For additional information,
refer to Section 414-01.
2. Remove the steering column upper and
lower shrouds.
3. Remove the multifunction switch.
1. Disconnect the multi-function switch
electrical connectors.
2. Remove the retaining screw.
3. Remove the switch.
Installation
1. To install, reverse the removal procedure.
E1230 EN 07/2001 2002 Bantam
To Next Page
Loading...
