204-01-10 Front Suspension 204-01-10
REMOVAL AND INSTALLATION
E1057 EN 06/2001 2002 Bantam
Lower Arm (14 707 0)
Removal
1. Loosen the front wheel nuts.
2. Raise and support the vehicle.
For additional information,
refer to Section 100-02.
3. Remove the front wheel.
4.
CAUTION: Protect the ball joint seal
using a soft cloth to prevent damage.
Detach the lower arm ball joint.
1. Remove the bolt.
2. Detach the lower arm ball joint.
5. Remove the lower arm.
• Remove the bolts.
Installation
1. Install the lower arm.
To Next Page
Loading...
