Ford 2002 Bantam - The Charging System Warning Indicator Is Inoperative

414-00-6 Charging System — General Information 414-00-6
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
3 Measure the resistance between the
instrument cluster C44b pin 7, circuit 64 (BU-
BK) and ground.
• Is the resistance greater than 10,000 ohms?
 Yes
INSTALL a new printed circuit board.
 No
REPAIR circuit 64 (BU-BK). TEST the sys-
tem for normal operation.
A4: CHECK FOR VOLTAGE
1.
Generator
(C303a)
2.
3 Measure the voltage between the generator
connector C303a pin 1, circuit 31 (BK) and
ground.
• Is the voltage greater than 10 volts?
 Yes
INSTALL a new generator.
 No
GO TO A2
PINPOINT TEST B: THE CHARGING SYSTEM WARNING INDICATOR IS INOPERATIVE
CONDITIONS DETAILS/RESULTS/ACTIONS
B1: CHECK LAMP CIRCUIT
1.
Generator
(C303a)
2.
E1297 EN 07/2001 2002 Bantam
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL
BACK TO CHAPTER INDEX