Ford 2002 Bantam - Halfshaft LH (14 320 8); Disassembly and Assembly

205-04-27 Front Drive Halfshafts 205-04-27
DISASSEMBLY AND ASSEMBLY
E1088 EN 07/2001 2002 Bantam
Halfshaft LH (14 320 8)
Special Tool(s)
Boot clamp tightening tool
204 - 169 (14 - 044)
General Equipment
Snap-ring pliers
Material Specification
High-durability grease WSD-M1C230-A
Clamping straps
Disassembly
NOTE: Use protective covers.
1. Disconnect the front drive halfshaft at the
transmission end.
• Clamp the front drive halfshaft in a
clamp.
1. Separate and discard the clamping
straps. Push back the boot.
2. Separate the tripod joint.
2. Remove the tripod star and the boot.
1. Detach the snap-ring using snap-ring
pliers and pull off the tripod star.
2. Pull off the boot.