205-04-19 Front Drive Halfshafts 205-04-19
REMOVAL AND INSTALLATION
E5892 EN 07/2001 2002 Bantam
Outer Constant Velocity (CV) Joint Boot (14 338 4)
Special Tool(s)
Boot clamp tightening tool
204-169 (14-044)
General Equipment
Snap-ring pliers
Material
Specification
High-durability grease WSD-M1C230-A
Clamping straps
Removal
1. NOTE: Use an Allen key to stop the piston
rod from turning.
Loosen the suspension strut top nut by five
turns.
2. Raise the vehicle. For additional
information, refer to Section 100-02.
3. Detach the lower suspension arm from the
spindle carrier.
To Next Page
Loading...
