Ford 2002 Bantam - Camshaft End Play

303-00-6 Engine System — General Information 303-00-6
GENERAL PROCEDURES
E4119 EN 07/2001 2002 Bantam
Camshaft End Play
1. NOTE:
Make sure that the camshaft is to
specification.
Using a Dial Indicator Gauge, measure the
endplay.
• Slide the camshaft in both directions.
Read and note the maximum and
minimum values on the Dial Indicator
Gauge.
• End play = maximum value minus minimum
value
• If the measurement is out of
specification, install new components.