Ford 2002 Bantam - Drive Belt - Power Steering Pump (with Air Conditioning) - Remove

211-02-41 Power Steering 211-02-41
REMOVAL AND INSTALLATION
Drive Belt - Power Steering Pump
(with Air Conditioning) - Remove
6. Remove the power steering drive belt.
1 Slacken the drive belt tensioner pulley
centre bolt.
2 Slacken the adjusting bolt.
3 Remove the drive belt.
7. Remove the power steering pump pulley
• Hold the centre of the pump shaft
with an Allen key if necessary.
9. Detach the high pressure pipe support
bracket.
10. Remove the auxiliary drive belt tensioner
bracket.
E6318 EN 07/2001 2002 Bantam