206-03-4 Front Disc Brake 206-03-4
REMOVAL AND INSTALLATION
E9414 EN 03/2001 2002 Bantam
Brake Pads
Special Tool(s)
Retractor, Caliper Piston
206-005 (12-014)
Material
Specification
Super DOT 4 brake
fluid
ESD-M6C57-A
Removal
CAUTION: If brake fluid is spilt on the
paintwork, the affected area must be
immediately washed down with cold wa-
ter.
1. Remove the wheel and tyre. For additional
information, refer to Section 204-03.
2. Remove the brake caliper retaining clip.
CAUTION: Suspend the brake caliper to
prevent load being placed on the brake
hose.
3. Detach the brake caliper from the anchor
plate.
1. Remove the covers.
2. Remove the bolts.
To Next Page
Loading...
