206-02-6 Drum Brake 206-02-6
REMOVAL AND INSTALLATION
E6595 EN 07/2001 2002 Bantam
Brake Shoes (12 285 0)
Material
Specification
Grease SAM1C-9107-A
Removal
1. Remove the brake drum, wheel spindle and
wheel hub assembly.
For additional information,
refer to Brake Dru
m in this section.
2. Remove the brake shoe hold down springs.
3. Hold the wheel cylinder pistons in place
with a rubber band.
4.
CAUTION: Do not damage the wheel
cylinder boots when detaching the
brake shoes.
Detach the brake shoes from the wheel
cylinder pistons.
5. Detach the brake shoes from the abutment
bracket.
To Next Page
Loading...
