206-02-7 Drum Brake 206-02-7
REMOVAL AND INSTALLATION (CONTINUED)
E6595 EN 07/2001 2002 Bantam
6. Detach the parking brake cable.
1. Pull the secondary brake shoe lever
backwards.
2. Disconnect the cable from the secondary
brake shoe.
7. Remove the brake shoe return springs.
1. Remove the lower spring.
2. Remove the upper spring.
8. Detach the primary brake shoe from the
strut support.
1. Pull the primary brake shoe away from
the support.
2. Detach the primary brake shoe.
9. Detach the secondary brake shoe from the
strut support.
1. Rotate the brake shoe through 90
degrees.
2. Detach the spring.
To Next Page
Loading...
