412-03-28 Air Conditioning 412-03-28
REMOVAL AND INSTALLATION
Evaporator to Condenser Line (34 645 0)
Special Tool(s)
Separator, quick-fit coupling
1/2" (blue)
412-027 (34-001)
Special Tool(s)
Separator, quick-fit coupling
5/8" (black)
412-038 (34-003)
Material
Specification
O-rings
(Green)
Removal
1. Standard preparatory measures
• Make a note of the radio keycode.
• Make a note of the preset radio stations.
CAUTION: Disconnect the battery nega-
tive lead.
NOTE: "Safety Precautions" and "General Re-
quirements and Safety Measures for Mainte-
nance and Repair Work". For additional informa-
tion, refer to Section 100-00.
2. Drain the air conditioning system. For
additional information, refer to Section 412-
00.
3. Detach the coolant expansion tank.
• Remove the single screw.
• Unhook the coolant expansion tank from
its bracket.
E1266 EN 07/2001 2002 Bantam
To Next Page
Loading...
