412-03-29 Air Conditioning 412-03-29
REMOVAL AND INSTALLATION (CONTINUED)
4. Remove the bulkhead extension.
• Remove the rubber seal.
• Unclip the cover of the central junction
box (CJB).
• Remove the single screw.
5. Remove the bulkhead extension
(continued).
1. Remove the bolts.
2. Unclip the connector.
6. Remove the bulkhead extension
(continued).
• Remove the single screw.
NOTE: Plug the refrigerant line and the e
rator.
vapo-
7. Disconnect the refrigerant line at the
evaporator.
E1266 EN 07/2001 2002 Bantam
To Next Page
Loading...
