303-05-199 Accessory Drive 303-05-199
REMOVAL AND INSTALLATION (CONTINUED)
E5903 EN 07/2001 2002 Bantam
Accessory Drive Belt — Vehicles with 1.8L Endura DE Diesel Engine (31 413 0)
Removal
1. Disconnect the battery ground cable.
2. Raise the vehicle.
3. Remove the drive belt.
1. Loosen the adjuster clamping bolt.
2. De-tension the belt by turning the
adjuster bolt anticlockwise.
Installation
1. Refit the drive belt.
• Make sure the drive belt is correctly
located on all pulleys.
2. Tension the drive belt.
1. Turn the adjuster bolt clockwise to
achieve the correct tension.
2. Tighten the clamping bolt.
3. Reconnect the battery ground cable.
To Next Page
Loading...
