308-02-37 Clutch Controls 308-02-37
REMOVAL AND INSTALLATION
E1151 EN 07/2001
Clutch Slave Cylinder (16 862 0)
Removal
5. Remove the transmission. For additional
information, refer to Section 308-03.
6. Remove the clutch slave cylinder.
1. Remove the bolts.
2. Remove the clutch slave cylinder.
Installation
4. Fit the clutch slave cylinder.
1. Coat the input shaft splines with high-
temperature grease.
2. Insert the clutch slave cylinder
3. Tighten the bolts.
All vehicles
5. Install the transmission. For additional
information,
refer to Section 308-03.
6. Bleed the hydraulic clutch system. For
additional information,
refer to Section 308-
00.
To Next Page
Loading...
