PINPOINT TEST A: BRAKES PULL OR DRIFT
CONDITIONS
DETAILS/RESULTS/ACTIONS
A1: ROAD TEST THE VEHICLE
1 Road test the vehicle and apply the brake
pedal.
• Does the vehicle pull or drift?
Yes
GO TO A2
No
Vehicle OK.
A2: TYRE INSPECTION
1 Check for excessive wear or incorrect tyre
pressures.
• Are the tyres in good condition?
Yes
GO TO A3
No
INFLATE the tyres to the correct pressure.
INSTALL new tyres if excessively worn.
TEST the system for normal operation.
206-00-6 Brake System — General Information 206-00-6
DIAGNOSIS AND TESTING (CONTINUED)
E1092 EN 07/2001 2002 Bantam
A3: BRAKE SHOE OR BRAKE PADS AND LINING INSPECTION
1 Inspect the brake shoes or brake pads for
grease or fluid on the linings and or wear
concerns.
• Are any concerns present?
Yes
INSTALL new brake shoes or brake pads.
TEST the system for normal operation.
To Next Page
Loading...
