211-02-45 Power Steering 211-02-45
REMOVAL AND INSTALLATION (CONTINUED)
Drive Belt - Power Steering Pump (Endura-DE
with Air Conditioning) - Installation
1. Install the power steering pump drive
belt.
1. Slacken the drive belt tensioner
pulley centre bolt.
2. Install the drive belt.
3. Tension the drive belt with the
adjusting bolts. Finger deflection
= 1 to 3 mm (used belt) or 1 to 2
mm (new belt).
4. Tighten the drive belt tensioner
pulley centre bolt.
E6318 EN 07/2001 2002 Bantam
To Next Page
Loading...
