205-04-9 Front Drive Halfshafts 205-04-9
REMOVAL AND INSTALLATION (CONTINUED)
E6319 EN 07/2001 2002 Bantam
5. Install the front wheel. For additional
information, refer to Section 204-03.
6. Tighten the axle stub nut.
7. NOTE: Use an Allen key to stop the piston
rod from turning.
Tighten the suspension strut top nut.
8. Park the vehicle on a level surface and fill
the transmission with oil until the level is to
the bottom edge of the filler hole.
To Next Page
Loading...
