211-02-36 Power Steering 211-02-36
REMOVAL AND INSTALLATION (CONTINUED)
Installation
1. NOTE: When installing a new power steering
pump, install the power steering pump pulley.
Using the special tool, install the power
steering pump pulley.
2. Install the power steering pump.
3. Connect the power steering high-pressure
line.
1. Connect the power steering high-
pressure line.
2. Install the power steering pump and
power steering high-pressure line support
bracket bolt.
4. Connect the power steering low-pressure
line.
E6613 EN 2002 Bantam
To Next Page
Loading...
