211-02-39 Power Steering 211-02-39
REMOVAL AND INSTALLATION (CONTINUED)
4. Remove the high-pressure line.
• Allow the fluid to drain into a suitable
container.
5. Remove the power steering pump.
Installation
1. NOTE: If installing a new power steering
pump the unions that are supplied fitted to
the pump should be removed and discarded.
Install a new union O-ring.
1. Push the O-ring onto the tool.
2. Locate the tool on the union and push on
the O-ring.
2. Install the power steering pump.
E6614 EN 2002 Bantam
To Next Page
Loading...
