303-04D-28 Fuel Charging and Controls — 1.8L Diesel Engine 303-04D-28
REMOVAL AND INSTALLATION (CONTINUED)
E6446 EN 09/2001 2002 Bantam
5. Unscrew the four unions from the fuel
injectors and remove the fuel injector
delivery pipes.
Installation
1. Refit the fuel injector delivery pipes and
loosely assemble the four unions to the fuel
injectors.
2. Loosely assemble the four unions to the
fuel injection pump.
3. Tighten the four fuel injector delivery pipe
unions to the fuel injectors.
To Next Page
Loading...
