206-06-14 Hydraulic Brake Actuation 206-06-14
REMOVAL AND INSTALLATION (CONTINUED)
E9362 EN 03/2001 2002 Bantam
5. Remove the accelerator pedal.
1. Remove the clip.
2. Remove the pedal.
6. Detach the brake pedal cross-shaft
actuating rod from the brake pedal.
• Remove the clip.
7. Detach the clutch master cylinder from the
brake pedal and bracket.
8. Detach the clutch master cylinder actuating
rod from the clutch pedal.
• Remove the clip.
9. Detach the brake pedal cross-shaft
mounting bracket from the bulkhead.
To Next Page
Loading...
