303-03-179 Engine Cooling 303-03-179
DIAGNOSIS AND TESTING
E7832 EN 09/2001 2002 Bantam
Engine Cooling
Inspection and Verification
1. Verify the customer concern by operating the
system.
2. Visually inspect for obvious signs of
mechanical or electrical damage.
3. If an obvious cause for an observed or
reported concern is found, correct the cause
(if possible) before proceeding to the next
step.
4. If the concern is not visually evident, verify
the symptom and refer to WDS.
Symptom Chart
Pinpoint Tests
Component Tests
To Next Page
Loading...
