303-01B-78 Engine — 1.6L / 1.3L RoCam 303-01B-78
REMOVAL (CONTINUED)
E6642 EN 07/2001 2002 Bantam
5. Remove the hoses.
1. EVAP solenoid valve vacuum hose
2. Positive crankcase ventilation hose
3. Brake booster vacuum hose
6.
WARNING: Escaping fuel. Observe the
safety regulations for working with
fuel.
Disconnect the fuel lines.
7. Remove the accelerator cable.
1. Remove the clip and pull the cable from
the bracket.
2. Unhook the inner cable.
8.
WARNING: Danger of scalding if the
engine is warm.
Drain the coolant (shown from below).
• Screw in the drain plug after draining.
To Next Page
Loading...
