303-01B-76 Engine — 1.6L 303-01B-76
IN-VEHICLE REPAIR (CONTINUED)
E6647 EN 07/2001 2002 Bantam
Installation
1. NOTE: Ensure gasket mating surfaces are
clean.
NOTE: Use a new oil pump and gasket.
NOTE:
The oil pump sealing flange must be
within ±20mm of cylinder block bottom
sealing flanges.
Install oil pump bolts.
2. Install a new front oil seal. For additional
informat
ion, refer to Front Oil Seal in this
s
ection
3. Install the oil pan. For additional
informat
ion, refer to Oil Pan in this section.
To Next Page
Loading...
