303-04D-34 Fuel Charging and Controls — 1.8L Diesel Engine 303-04D-34
SPECIFICATIONS (CONTINUED)
E6452 EN 09/2001 2002 Bantam
Fuel Injection Pump
Specification
Manufacturer Bosch
Type Distributor
Governor type Two speed
Maximum no load speed (rev/min) 5350 ± 50
Idle speed (vehicles without air conditioning) (rev/min) 920 ± 50
Idle speed (vehicles with air conditioning) (rev/min) 950 ± 10
Minimum engine speed (vehicles with air conditioning) (rev/min) 905 ± 35
Deceleration time (seconds) 5 (max)
Fuel Injectors
Specification
Manufacturer Bosch
Type Pintle
Nozzle opening pressure (bar) 158 - 165
Back leakage (bar) (maximum of 5 seconds allowed for the pressure to fall
from the upper to the lower value quoted)
125 - 100
Needle seat leakage (bar) (hold for 10 seconds) 125
Glow Plugs
Specification
Type EZD 8
Torque Specifications
Description
Nm
Endura DE Diesel Engine Crankshaft
pulley/vibration damper retaining bolts
35
Endura DE Diesel Engine mounting bracket
retaining bolts
50
Endura DE Diesel Engine mounting bracket
retaining nut (center)
69
Endura DE Diesel Engine mounting bracket
retaining nuts (outer)
120
Endura DE Diesel Engine Fuel injection pump
drive belt tensioner retaining bolt
45
Endura DE Diesel Engine Fuel injection pump
drive gear retaining bolts
20
Endura DE Diesel Engine Fuel injection pump rear
support bracket retaining bolts
20
To Next Page
Loading...
