Ford 2002 Bantam - Page 1371

417-01-50 Exterior Lighting 417-01-50
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
M8: CHECK THE RELAY – TURN SIGNAL FOR PROPER FUNCTION
1.
Relay – turn signal
2 Actuate the hazard warning switch.
3 Check if the hazard warning lamps are on
continuously.
• Are the hazard warning lamps on
continuously?
 Yes
GO TO M9
 No
INSTALL a new relay – turn signal. TEST
the system for normal operation.
M9: CHECK THE RELAY – ANTI-THEFT FLASHER FOR PROPER FUNCTION
1. 2.
Relay – anti-theft
flasher C323
3 Check if the hazard warning lamps are on
continuously.
• Are the hazard warning lamps on
continuously?
 Yes
CHECK the multifunction switch, according
to Component Testing attached to the wiring
diagrams. If necessary INSTALL a new one.
TEST the system for normal operation.
 No
INSTALL a new relay – anti-theft flasher.
TEST the system for normal operation.
E9426 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL