412-02-11 Heating and Ventilation 412-02-11
REMOVAL AND INSTALLATION (CONTINUED)
E1246 EN 07/2001 2002 Bantam
2. Install the fascia crash padding.
For additional information,
refer to Section 501-12.
Vehicles with air conditioning
3. Evacuate and fill the air conditioning
system. For additional information,
refer to Section 412-03.
4. Fill the cooling system with coolant.
For additional information,
refer to Section 303-03.
5. Standard finishing operations.
• Connect the battery negative lead.
• Remove the protective covers.
• Enter the radio keycode.
• Reprogram the preset radio stations.
• Reset the clock.
• Road test the vehicle to collect data for
the PCM.
6. Check the operation of the heating and air
conditioning system (if fitted).
To Next Page
Loading...
