412-02-5 Heating and Ventilation 412-02-5
REMOVAL AND INSTALLATION (CONTINUED)
E1248 EN 07/2001 2002 Bantam
4. Remove the bulkhead extension.
• Remove the rubber seal.
• Unclip the cover of the central junction
box (CJB).
• Remove the single screw.
5. Remove the bulkhead extension
(continued).
1. Remove the bolts.
2. Disconnect the plug.
6. Remove the bulkhead extension
(continued).
• Remove the single screw.
Vehicles with air conditioning
NOTE: Seal the evaporator and refrigerant lines
with plugs.
1. Disconnect the refrigerant lines.
To Next Page
Loading...
