412-02-6 Heating and Ventilation 412-02-6
REMOVAL AND INSTALLATION (CONTINUED)
E1248 EN 07/2001 2002 Bantam
All vehicles
8. Remove the pollen filter housing.
9. Remove the blower motor cover.
10. Remove the blower motor.
• Unscrew the bolts.
• Separate the connector located in the
passenger footwell.
• Pull out the grommet together with the
wire and the plug.
Installation
1. Install the blower motor.
NOTE: Perform steps 2 and 3 only if water is
entering through the pollen filter on the bulk-
head.
2. Thoroughly clean the area around the
pollen filter opening on the bulkhead.
To Next Page
Loading...
