308-06-125 Manual Transaxle External Controls 308-06-125
DISASSEMBLY AND ASSEMBLY (CONTINUED)
E6748 EN 07/2001
4. Remove the shift rod boot and the housing
cover.
Assembly
1. Reassemble the gearshift mechanism.
1. Insert the shift rod.
2. Install the housing cover.
3. Slide on the shift rod boot.
4. Slide on the gearshift mounting.
5. Slide the mounting sleeve onto the
gearshift lever.
NOTE: Make sure that the gearshift lever is
placed correctly in the shift rod.
6. Install the gear lever.
7. Install the noise damping pad.
To Next Page
Loading...
