309-00-10 Exhaust System — General Information 309-00-10
REMOVAL AND INSTALLATION (CONTINUED)
5. Remove the exhaust system by detaching it
from the rubber insulators.
• Four or five rubber insulators depending
on variant.
Installation
1. Assemble the exhaust system.
• Loosely connect the service exhaust
components.
2. Install the exhaust system.
• Examine the rubber insulators for
damage/fatigue and renew as necessary.
• Align the exhaust system to the vehicle
and attach it into the rubber insulators.
E5949 EN 07/2001 2002 Bantam
To Next Page
Loading...
