310-00-8 Fuel System — General Information 310-00-8
GENERAL PROCEDURES (CONTINUED)
E3614 EN 09/2001 2002 Bantam
2. NOTE:
Make sure the collar on the fuel line is
inserted fully into the fuel line quick release
coupling before the locking tang is locked.
Install the fuel line quick release coupling.
1. Install the fuel line quick release coupling
locking tang.
2. Rotate the fuel line quick release
coupling locking tang into position.
3. NOTE:
Make sure the collar on the fuel line is
inserted fully into the fuel line quick release
coupling before the locking tang is locked.
Install the fuel line quick release coupling.
1. Install the fuel line quick release
coupling.
2. Press the fuel line quick release coupling
locking tang into position.
To Next Page
Loading...
