310-01A-12 Fuel Tank and Lines — Petrol Engines 310-01A-12
DIAGNOSIS AND TESTING
E1189 EN 09/2001 2002 Bantam
Fuel Tank and Lines
General Equipment
WDS
Inspection and Verification
1. Verify the customer concern by operating the
system.
2. Visually inspect for obvious signs of
mechanical or electrical damage.
Visual Inspection Chart
Mechanical
Electrical
• Damaged fuel lines.
• Damaged push
connect fittings.
• Fuel Leaks.
• Damaged fuel tank
filler cap.
• Damaged fuel tank
filler pipe.
• Incorrectly fitted fuel
filter
• Inertia fuel shutoff
switch.
• Loose or corroded
electrical connectors.
3. If an obvious cause for an observed or
reported concern is found, correct the cause
(if possible) before proceeding to the next
step.
4. If the concern is not visually evident, verify
the symptom and refer to WDS.
To Next Page
Loading...
