310-01A-17 Fuel Tank and Lines — Petrol Engines 310-01A-17
REMOVAL AND INSTALLATION
E7857 EN 09/2001 2002 Bantam
Fuel Filter
Removal
WARNING: This procedure involves fuel
handling. Be prepared for fuel spillage
at all times and always observe fuel
handling precautions.
WARNING: Do not smoke or carry
lighted tobacco or open flame of any
type when working on or near any fuel
related components. Highly flammable
mixtures are always present and can ig-
nite. Failure to follow these instructions
may result in personal injury.
1. Disconnect the battery ground cable. For
additional information,
refer to Section 414-01.
2. Release the fuel system pressure. For
additional information,
refer to Section 310-00.
3. Raise and support the vehicle. For
additional information,
refer to Section 310-02.
4. Disconnect the fuel lines. For additional
infor
mation, refer to Section 310-00.
5. NOTE:
There is a fuel flow arrow on the fuel
filter. Note its direction.
Remove the fuel filter.
To Next Page
Loading...
