310-01A-20 Fuel Tank and Lines — Petrol Engines 310-01A-20
REMOVAL AND INSTALLATION (CONTINUED)
E1190 EN 09/2001 2002 Bantam
4. Remove the fuel pump nylon insert.
5. Remove the fuel pump.
Installation
WARNING: Do not smoke or carry
lighted tobacco or open flame of any
type when working on or near any fuel
related components. Highly flammable
mixtures are always present and can ig-
nite. Failure to follow these instructions
can result in personal injury.
1. Install a new fuel pump seal.
2. To install, reverse the removal procedure.
To Next Page
Loading...
