310-01A-25 Fuel Tank and Lines — Petrol Engines 310-01A-25
REMOVAL AND INSTALLATION (CONTINUED)
E6463 EN 09/2001 2002 Bantam
6. Partially lower the front crossmember. For
a
dditional information,
refer to Section 502-00.
7. Detach the exhaust system from the front
and centre rubber insulators.
8. Detach the exhaust system from the three
rear rubber insulators.
• Allow the exhaust system to be
supported by the rear suspension
assembly.
9. Remove the exhaust heat shields.
To Next Page
Loading...
