EasyManua.ls Logo

Ford 2002 Bantam - Page 1120

Ford 2002 Bantam
1663 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
412-00-27 Climate Control System — General Information 412-00-27
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
D2: CHECK THE POWER SUPPLY OF THE FUSE F16
1.
Fuse F16 (CJB)
2.
3 Measure the voltage between fuse F16 and
ground.
• Is battery voltage indicated?
 Yes
GO TO D3
 No
REPAIR the power supply of the fuse F16
by using the wiring diagrams. TEST the sys-
tem for normal operation.
D3: CHECK THE FUSE F13
1.
2.
Fuse F13 (CJB)
• Is the fuse OK?
 Yes
GO TO D4
 No
INSTALL a new fuse F13 (15 A). If the fuse
blows again, LOCATE and REPAIR the
short to ground of the circuit(s) by using the
wiring diagrams. TEST the system for nor-
mal operation.
D4: CHECK THE POWER SUPPLY OF THE FUSE F13
1.
Fuse F13 (CJB)
2.
3 Measure the voltage between fuse F13 and
ground.
• Is battery voltage indicated?
 Yes
GO TO D5
 No
REPAIR the power supply of the fuse F13
by using the wiring diagrams. TEST the sys-
tem for normal operation.
E9425 EN 07/2001 2002 Bantam

Table of Contents

Related product manuals