412-00-39 Climate Control System — General Information 412-00-39
GENERAL PROCEDURES (CONTINUED)
5. NOTE: Clean the connections using
refrigerant oil and a lint-free cloth.
Press the indicator ring into the clamping
spring.
6. NOTE: Install new refrigerant line O-ring
seals.
NOTE: Coat the refrigerant line O-ring seals in
clean refrigerant oil prior to installation.
Connect the refrigerant lines.
• Check that the clamping spring engages
correctly.
E6814 EN 07/2001 2002 Bantam
To Next Page
Loading...
