412-02-9 Heating and Ventilation 412-02-9
REMOVAL AND INSTALLATION (CONTINUED)
E1246 EN 07/2001 2002 Bantam
5. Remove the bulkhead extension.
• Remove the rubber seal.
• Unclip the central junction box (CJB)
cover.
• Remove the single screw.
6. Remove the bulkhead extension
(continued).
1. Remove the bolts.
2. Unclip the connector.
7. Remove the bulkhead extension
(continued).
• Remove the single screw.
Vehicles with air conditioning
NOTE: Seal the evaporator and refrigerant lines
with plugs.
1. Disconnect the refrigerant lines.
To Next Page
Loading...
