412-03-19 Air Conditioning 412-03-19
REMOVAL AND INSTALLATION (CONTINUED)
8. Using the special tool, remove the
evaporator core orifice.
• Guide the tool into the line and hook it
into the evaporator core orifice.
• Turn the tool clockwise and pull out the
evaporator core orifice.
9. NOTE: Only necessary if the evaporator core
orifice is broken.
Using the special tool, remove the broken
evaporator core orifice.
Installation
NOTE: Install new refrigerant line O-ring seals.
NOTE: Coat the refrigerant line O-ring seals in
clean refrigerant oil prior to installation.
1. To install, reverse the removal procedure.
E6718 EN 07/2001 2002 Bantam
To Next Page
Loading...
