412-03-21 Air Conditioning 412-03-21
REMOVAL AND INSTALLATION (CONTINUED)
4. Remove the accumulator / dehydrator.
5. Raise the vehicle. For additional
information, refer to Section 100-02.
6. Remove the front right-hand wheelhouse
cover.
• Remove the bolts.
7. Remove the accumulator / dehydrator from
below.
Installation
NOTE: Tightening torques. For additional in-
formation, refer to Section 412-03. Specifica
tions
NOTE: Before connecting the refrigerant lines,
fit them with new O-rings. Coat the new O-rings
with refrigerant oil before fitting them.
1. Refit the components in reverse order.
E1262 EN 07/2001 2002 Bantam
To Next Page
Loading...
