412-04-2 Control Components 412-04-2
DESCRIPTION AND OPERATION
E1274 EN 07/2001 2002 Bantam
Control Components
Item
Description
1 Air distribution switch
2 Air conditioning switch
3 Temperature control switch
4 Recirculated air/fresh air control switch
5 Fan motor operating switch
The fan motor operating switch sets the
heater/fresh air fan to one of four different
speeds.
The temperature control switch allows choice of
temperature and controls the heater regulator
valve.
The air distribution switch uses a cable to provide
step less control of the air distribution in the
passenger compartment.
Pressing the recirculated air/fresh air control
switch starts recirculated air operation, and the
control lamp in the switch comes on.
Pressing the air conditioning switch and when the
temperature is above +4 °C and the fan is
switched on starts the air conditioning system
and the control lamp in the switch comes on.
To Next Page
Loading...
