412-04-5 Control Components 412-04-5
REMOVAL AND INSTALLATION
E1276 EN 07/2001 2002 Bantam
5. Remove the radio. For additional
information,
refer to Section 415-01.
6. Remove the bezel.
1. Remove the screws.
2. Unclip the clips.
• Pull the bezel forwards.
• Disconnect the plug
7. Unclip the air distribution shaft.
8. Remove the heater / air conditioning
module and the fan operating switch.
Installation
1. Refit the components in the reverse order.
2. Install the radio. For additional information,
refer to Section 415-01.
To Next Page
Loading...
