413-01-24 Instrument Cluster 413-01-24
REMOVAL AND INSTALLATION (CONTINUED)
9.
CAUTION: Take care not to bend or
damage the printed circuit and the
electrical components when lifting it
off the locating dowels.
Remove the printed circuit.
10. Remove the pin contacts from the printed
circuit.
Installation
CAUTION: Take care not to bend or
damage the printed circuit and the elec-
trical components when installing.
1. To install, reverse the removal procedure.
E1284 EN 09/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
To Next Page
Loading...
