414-01-11 Battery, Mounting and Cables 414-01-11
REMOVAL AND INSTALLATION (CONTINUED)
E7860 EN 07/2001 2002 Bantam
5. Release the battery to starter motor
solenoid cable.
• Cut the tie strap.
6. Disconnect the generator electrical
connector.
7. Raise and support the vehicle.
For additional information,
refer to Section 100-02.
8. Remove the battery to starter motor
solenoid cable.
• Disconnect the starter motor electrical
connector.
BACK TO CHAPTER INDEX
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
To Next Page
Loading...
