417-01-38 Exterior Lighting 417-01-38
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
4 Check if the left-hand turn signal lamps are on
continuously.
• Are the left-hand turn signal lamps on
continuously?
Yes
REPAIR the short to power; circuit(s)
connected with splice S36, by using the
wiring diagrams. TEST the system for
normal operation.
No
CHECK the instrument cluster, If necessary
INSTALL a new one. TEST the system for
normal operation.
K14: CHECK THE RELAY – ANTI-THEFT FLASHER FOR PROPER FUNCTION
1.
2.
Relay – anti-theft
flasher C323
3 Check if the right-hand turn signal lamps are
on continuously.
• Are the right-hand turn signal lamps on
continuously?
Yes
GO TO K15
No
INSTALL a new relay – anti-theft flasher.
TEST the system for normal operation.
K15: CHECK THE RELA – TURN SIGNAL FOR PROPER FUNCTION Y
1.
2.
Relay – turn signal
3.
4 Turn the multifunction switch to the RIGHT-
HAND TURN SIGNAL position.
E9426 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL