417-01-76 Exterior Lighting 417-01-76
GENERAL PROCEDURES (CONTINUED)
4. NOTE: Some scattered light from the low
beam may lie above the 15 degrees line.
NOTE: After horizontal adjustment readjustment
of the vertical axis might be necessary.
Horizontal adjustment (LHD variant shown).
• Adjust the low beam so that the rising
line of the light/dark boundary lies at the
intersection of horizontal and the 15
degrees line.
E6758 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
To Next Page
Loading...
