501-09-14 Rear View Mirrors 501-09-14
REMOVAL AND INSTALLATION (CONTINUED)
Installation
1. Push in the outboard edge of the door
mirror glass mounting towards the back of
the mirror case.
2. NOTE: Connect the electrical connector
where fitted.
Locate the glass onto the door mirror glass
mounting.
1. Attach the inboard edge of the door
mirror glass mounting to the glass.
2. Lay the glass across the door mirror
glass mounting.
3. Push the outboard edge of the glass onto
the door mirror glass mounting.
07/2001 2002 Bantam
To Next Page
Loading...
