501-10-13 Seating 501-10-13
DISASSEMBLY AND ASSEMBLY (CONTINUED)
5. Detach the lower lateral tension rod
retaining clips.
6. Roll the cover up the backrest.
7. Detach the upper lateral tension rod
retaining clips.
8. NOTE: Make sure the lateral tension rod
retaining clips do not enter the retaining
sleeves.
Roll the backrest cover upwards to access
the pleating hog rings.
• Cut the hog rings.
9. Remove the backrest cover.
• Detach the retaining strip.
E9431 EN 07/2001 2002 Bantam
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
CONTINUED
BACK TO CHAPTER INDEX
To Next Page
Loading...
